Selective and full-site clearing for rural and estate acreage, development sites and wooded lots across King Township, including trees, brush, stumps and debris. Backed by a genuine King City land-clearing project, not a generic service description.
Rural & Estate • Construction & Development • Wooded Lots • Selective or Full Clearing
Designated trees within the defined project area, cleared according to the agreed scope.
Brush, saplings and overgrown vegetation where included in the project scope.
Stump removal and grubbing where offered as part of the agreed scope, as carried out on our own King City project.
Designated trees or buffer strips flagged and preserved per a site plan, where the project calls for it.
On-site mulching of brush and smaller debris, and haul-away of merchantable timber and larger trunk sections, according to the agreed scope.
Coordinated clearing for development sites and larger acreage, sequenced with your project timeline.
Clearing defined areas of larger rural and estate lots across King Township, including vegetation management and access preparation.
Clearing according to defined plans and scope, sequenced with your civil engineer or grading contractor's timeline, with retained versus removed vegetation coordinated with your project team.
Clearing on properties bordering treed areas, with woodlot-specific considerations flagged and bridged to York Region requirements where relevant.
Brush, volunteer growth and unmanaged vegetation cleared to reclaim usable areas of a larger property.
King Township's rules work differently from most nearby municipalities. Here is a quick orientation, not the complete rule set.
King Township currently does not have a general tree-preservation by-law for ordinary trees on private property, so clearing individual trees outside a woodlot generally does not require a Township tree permit.
Trees within a woodland or woodlot over 0.2 hectares (0.5 acres) may fall under York Region's Forest Conservation By-law, which is separate from any Township rule. Confirm with York Region whether your property qualifies before clearing a wooded area.
Land-clearing projects that also involve grading, fill movement, topsoil removal or other regulated site alteration may require additional Township approvals under the Site Alteration By-law. Clearing alone, without grading or fill work, is not the same thing, confirm your specific project with the Township.
The applicable requirements depend on the property, vegetation, clearing area and whether grading or fill work is also involved. Tree Craft can review the project scope and help identify items that may need to be confirmed with the Township or York Region before work is scheduled.
What needs to happen after clearing, construction, property improvement, access or vegetation management, influences the clearing scope.
Which areas, trees and vegetation are included, and which are to remain. Site plans, where they exist, help define the work, as on our own King City project.
Designated trees and vegetation for removal and retained buffer areas are identified before mobilization.
Machine and crew access, long rural driveways, gates and staging all shape the practical approach.
Whether logs remain or are removed, brush is mulched, and stumps and debris are addressed is defined before work starts.
Individual-tree, woodlot or site-alteration considerations are identified before the applicable work begins.
The work area and its boundaries are confirmed before crews arrive.
Machine and crew access, plus a staging area, are ready for the scope.
Utility locate documentation is in place where applicable to the project.
Timing with a grading contractor or other trades is confirmed ahead of clearing, as it was on our own King City project.
Where applicable, valid utility locate documentation should be retained on site for the duration of the work.
Where a project also requires excavation, grading or other site work, related contractor resources can be coordinated where included in the project scope.
May be mulched on-site or otherwise handled according to the agreed scope.
Hauled away, processed or retained onsite depending on the project agreement and practical requirements.
Grubbing and removal are available where the project scope calls for it.
Final debris cleanup within the agreed work area, prepared for whatever comes next on the project.
Material handling is part of the project scope and can materially affect equipment, hauling, disposal requirements and pricing.
Review project objective, vegetation, clearing area, access and general site conditions.
Define the intended work area and remove/retain scope, using site plans as project inputs where they exist.
Identify whether individual-tree, woodlot or site-alteration considerations apply, and what may need confirming with the Township or York Region.
Determine the practical crew, equipment and staging approach for the defined scope.
Carry out the approved, agreed removal scope using methods appropriate to the site.
Complete the agreed stump, grubbing, wood, brush and debris handling.
Complete the clearing scope and prepare the area for the next agreed project phase, coordinating with the owner, GC or grading contractor where applicable.
Larger rural and acreage clearing areas generally require more labour, equipment time and material handling.
Densely wooded areas involve more cutting, handling and debris.
Larger trees can affect the removal method and time required.
Heavier undergrowth adds to the clearing and hauling scope.
Long rural driveways, gated properties and restricted access can change the removal approach.
Slopes, wet ground and other site conditions affect how work can be carried out.
Stump and grubbing requirements vary depending on what the site needs afterward.
Hauling, mulching, log handling and disposal requirements affect project logistics.
Project-specific equipment resources may affect scope and cost.
Woodlot or site-alteration confirmation and coordination requirements can affect scheduling and scope.
For larger rural, acreage or development projects, provide the property address, approximate clearing area, photos and any available site plans.
Equipment used on this project included excavators, a forestry mulcher, a bulldozer and dump trucks, sequenced so the site was fully cleared and grubbed within the developer's schedule and the grading contractor could mobilize the next business day.
Tree Craft supports clearing projects across King City and the wider King Township, from rural and estate acreage to development sites bordering woodlots. Our completed King City project reflects the kind of larger-scale, development-adjacent work common in this area.
A genuine 4-acre development-site clearing project completed in King City, not just a general service description.
Familiarity with King's unusual no-by-law structure, the York Region woodlot rule and the Site Alteration By-law, with support identifying what applies and what should be confirmed.
Equipment and project resources coordinated according to site access, clearing scope and material-handling requirements.
The cleared area is prepared and coordinated for the next agreed project phase, not just cleared and left.
Land clearing covers trees, brush and vegetation, stump and grubbing scope where offered, and wood, debris and mulching handling, cleared according to a selective or full-clearing plan defined in the project scope.
Cost depends on site size, tree and vegetation density, access, stump and grubbing requirements, material handling and equipment needs, plus any regulatory or project coordination involved. Every quote is based on the specific site, not a flat rate.
It depends on what's involved. King Township does not currently have a general tree-preservation by-law for ordinary trees, but woodlots and any grading or fill work involved in the project are treated differently. See the full King City Tree Bylaw Guide, and confirm woodlot or site-alteration questions directly with York Region or the Township.
Yes. We completed a 4-acre land clearing project for a residential development site in King City, including buffer-strip preservation per the approved site plan. See the full case study above.
Yes, where practical and consistent with the approved project scope, specified trees or a buffer area can be retained while designated vegetation is removed, as on our own King City project. We can't guarantee every requested tree can legally or practically remain.
Stump, grubbing and debris handling are defined in the quote and project scope rather than automatically included, so confirm what you need when requesting a site assessment.
Yes. Tree Craft provides a defined tree and vegetation clearing scope for development and construction projects, coordinated around site access, site plans and next-project-phase requirements, sequenced with your civil engineer or grading contractor where applicable.
Not necessarily. Land-clearing projects that also involve grading, fill movement, topsoil removal or other regulated site alteration may require additional Township approvals under the Site Alteration By-law. Clearing alone, without grading or fill work, is a different situation, confirm your specific project directly with the Township.
Send the property address, approximate clearing area, photos and any available site plans. Tree Craft can review the vegetation, access, stump and debris requirements, and regulatory coordination needs before defining the clearing scope.
Commercial or development project? Have plans or drawings available for review.
